Do we have any Italians here?
Posted by: Rens - Forum: General Chatter - Replies (4)

Yes, maybe a weird question. I saw my dream guitar on an Italian website (the same ad on two sites) and I have contacted the seller Monday but haven't heard anything. I did try and contact him in English and maybe he doesn't speak it or doesn't trust it.. so I'm hoping to find someone from there who's willing to lend me a little hand.

Hope this kind of topic is allowed!

04-26-2019, 11:46 AM

  NGD - E20-OM
Posted by: Jklotz - Forum: Eastman Acoustic Guitars - Replies (7)

Hi guys, 

New member here. I'm mainly an electric player, but love acoustic for relaxing around the house. Long story short, I've always wanted an OM-28, but haven't been able to find one with a 1 3/4" nut and a neck that works for me. All the modern Martins are just too skinny for me, and I'm not a big fan of V necks. So I stumbled upon the Eastmans and thought an E20-OM might be a nice little placeholder until I could find the OM-28 I've been searching for. 

I have to admit I'm very surprised as what a great little guitar this thing is. I had a rocky start with it, took a few days to acclimate I guess. But now it sounds fantastic! I mean, it's common knowledge that they are amazing bang for the buck (addi top, all solid woods, jescar frets, bone nut and saddle, dovetail joint, ebony board, etc etc - unheard of at this price point), but I was not expecting to like the tone as much as I do. Hit an open D chord in drop D tuning, and it just sounds majestic! Very addictive. And I love the neck carve, just chunky enough to fill the hand with a nice taper as it goes up. 

My only complaint is the string spacing. I wish it had wider spacing, which would suit an OM much better IMHO.

Anyway, just wanted to say hi. I'll do a full review with pics and a video after I really get to know it better, but so far, it seems to be a killer guitar.

04-26-2019, 08:54 AM

  FS/OT D'Addario strings
Posted by: gnappi - Forum: For Sale / Trade and Online Deals - No Replies

I have 7 sets of D'Addario ECG25 Chrome strings (.012-.052) 7 sets (bulk packed one open but complete) of D'Addario EXL115-10P, and three sets of D'Addario EXL110 3d (10-46)

I went over to Elixir strings and figure someone else could use these.

Y'all know what they cost (ECG25's are $15 and EXL's are ~$4.85) shoot me an offer that's not insulting, of course I'll take full retail :-) and I will also trade for Elixir nanoweb 10-46's too.

I prefer not to piecemeal them out and would like to off the ECG's as one lot of 7 and the EXL115's as one lot of 7. and the EXL110's as one lot of 3. I H-A-T-E the post office and refuse to go there more than a few times :-)

04-25-2019, 02:58 AM

  Eastman T-165 MX owners?
Posted by: gnappi - Forum: Eastman Electric and Archtop Guitars - Replies (8)

Does anyone else here have a T-165 MX?

I ask because the one problem with mine (and a few other Eastman semi models) is it did not come from Eastman with a pickguard or an option to buy one... Grrr...

To correct this glaring problem I made what I feel is a nice looking cardboard template for my186 and cut the three layer pickguard tonight. Tomorrow I finish fitting and polishing the edge and mounting it.

So, if anyone here has a T-165MX and would like a cardboard template I'll send you one. Ask nice and I'll even cut a rectangular slab of three layer (black/white/black) pickguard material for it, I'll even pay the postage :-)

See Eastman, it's NOT a big freakin' deal, STOP making gits without a PG :-)


Attached Files
.jpg
File size: 57.84 KB
Downloads: 186

04-20-2019, 10:36 PM

  Best Eastman Brick & Mortar in San Diego, CA
Posted by: Wildfield - Forum: General Chatter - Replies (1)

I'm in San Diego today and now have some free time in the afternoon.  Can anyone recommend the best Eastman retailer in San Diego?

04-19-2019, 06:59 AM

  Pickguard for AC420
Posted by: potlikr - Forum: General Chatter - Replies (5)

I need some advice about putting a pickguard on my AC420.  Do any of you know of a current mfg. that makes a pickguard that will fit the Eastman tone hole, without modification to the guard?  I was thinking along the lines of maybe a Taylor or Martin guard.  Thanks

04-18-2019, 06:49 AM

Big Grin New to Site!
Posted by: potlikr - Forum: Introductions and EGF Annoucements - Replies (9)

Hello from Texas.  I currently have two Eastman's, a E1D and an AC420.  Love the quality and sound.

04-18-2019, 06:44 AM

  E10om-tc
Posted by: DukeS - Forum: Eastman Acoustic Guitars - Replies (8)

Hey everyone,
I know several of our members plus Tim have the E10om-tc. Just curious on your thoughts. Yes, I am really interested in buying a Mahogany back and sides, OM or 000. And I have been looking and trying used Martin's.
So really interested how you like your guitar after a month or so. Is it the first guitar you pick up? How is it for flat picking?
Thanks guys and appreciate your thoughts and help

Duke

04-17-2019, 04:33 PM

  E10D on eBay
Posted by: Pura Vida - Forum: For Sale / Trade and Online Deals - Replies (3)

No affiliation, but seems in good condition at a great price.  It's an auction, so price may change -- less than 24 hours to go.

https://www.ebay.com/itm/Eastman-10D-Aco..._Auction=1

04-15-2019, 04:41 PM

  'Intro to Eastman' video from Peach Guitars
Posted by: woodnstring - Forum: Eastman Acoustic Guitars - Replies (2)

Nice overview video posted today from Peach Guitars with Pepijn from Eastman, demoing the:
- SB57 Black
- T59V Antique Amber
- T58V Antique Amber
- T184MX Goldburst (sweet!)
- E10-OOSS/V
- DT30-OM

Enjoy!
https://youtu.be/zvDrNYJPWSQ

04-15-2019, 01:21 PM