Just took delivery on a E20D TC and wondered if what looks like a tab at the rear of the pick guard is to pull off a protective plastic film? Thank you in advance and hopefully will be back with more information.

Hi All! Just joined as a recent new owner of a T486!

I recently acquired an August 2021 build Eastman T486 in the Classic finish and thought I would share my impressions of this instrument. A little background to help with a baseline on my opinions; this is my third electric guitar. I also own a 2015 Gretsch G5435 Electromatic Pro Jet (made in China) and a 2019 Epiphone Joe Pass Emperor II Pro (made in Indonesia). The Gretsch is a ‘chambered’ solid body – kind of like a Les Paul, but with a low output Gretsch Filtertron sound that sparkles. The Joe Pass, as the name suggests is a jazz oriented full hollow guitar with Epiphone’s great Probucker pickups and coil splitting. I now play mainly jazz tunes, but also like to play blues and British alt-rock from the 80’s and 90’s (The Smiths etc). Both of those guitars are in my opinion great for their price, and I particularly love playing the Joe Pass. With the addition of a case the Epi Joe Pass is about the same price here as the T486, perhaps a shade under. The Gretsch is about 2/3 the price with a hard case. So the T486 is arguably my most expensive guitar. I play mainly through a Roland Blues Cube Artist and like clean tones with a little drive.

The T486 came about after a 12 month urge for a 335 type semi-hollow for more bluesy tones – I have never owned a semi-hollow, but have admired my tutor’s gorgeous 1980’s Ibanez AS200 for some time now. I considered many options – the three main contenders being the Ibanez AS153, The Yamaha SA2200 (used) or an Epi Sheraton. The Sheraton is basically the thinline double cut version of my Joe Pass, same pickups, wiring, appointments and almost the same tone – so I ruled her out first. The Yamaha was twice my budget new and impossible to find used – these are magnificent guitars to play but beyond what I was prepared to spend. The AS153 is probably the most equivalent to the T486, but a very warm jazzy tone, which I already had covered. Also in the price range were various thinline Gretsch Electromatics and Streamliners – the Electromatics in particular are great well made instruments – but not the tone or vibe I was after.


FIRST IMPRESSIONS:
Now the Eastmans are unique guitars. Some might ask what’s so different about yet another 335 type semi-hollow, and I would answer “the finish”. My T486 is the Classic finish – I have not seen another brand with a finish like this, it is brown with a touch of red to it that has a very subtle burst. The finish grades a little lighter near the peaks of the ‘ears’ of the cut-aways. The flame on the front and back is vivid without being overdone. The gloss lacquer is not a nitro – it’s their new less hazardous to apply finish, I’m guessing it’s a very thin poly. [Frankly, I don’t buy into or value the tone difference of nitro vs poly when it comes to a solid or semi-hollow guitar with layered/ply top. I do believe it is relevant to the unamplified sound of full hollows with carved solid soundboards – but in those cases a violin varnish would be a better choice over nitro or poly.] Whatever the varnish is that is applied to the T486, in any case, it is stunning and thin enough to show where it has ‘sunk’ into the grain. The overall effect of the finish is a hint of vintage whilst being clearly new. It does not feel ‘plastic’ to the touch.

The binding is also unique for a mass produced guitar. It not only multi-ply black and ivory along the front, but multi-ply across it’s thickness too. So seen from the side it has ivory and ivory with a slight green hue stripes. Same at the heel, along the fretboard, and the headstock. All beautifully applied and gorgeous.

The fretboard is a tight grained wood, specified as ebony, stained black. It is super smooth, and feels almost like glass to the touch. The split inlays are mother of pearl (not pearloid) and were accurately and cleanly applied – they look great and I can’t fault them. The overall impression of the guitar is of superior quality and – there’s no other way I can describe it – pure class. I love this finish.

In addition to this, the hard case it is supplied with is lovely. Well made, solid and wrapped in a faux leather textured covering that impresses.

HARDWARE:
The Gotoh bridge and tail, the pots and knobs and switches are all excellent and considerably better than on my Epi or the Gretsch. The tone knobs have a very linear and noticeable effect. All the pots are smooth and secure when used. The Switchcraft pup selector switch is solid. By contrast, I had to replace the switch on the Epi after a year and it always felt sloppy, and the tone adjustment is not very linear. I had to replace the volume pots on the Epi too. The Gretsch tone control has a very narrow band goes rapidly from thick wooly sock tone to sparkle in a fraction of a turn. It’s no competition really.

Where the Epi does trump the Eastman though are the tuners. The Joe Pass has 18:1 Grovers which are a joy. Fine, predictable, reliable. The Eastman has what I think are proprietary ‘Ping’ 14:1 tuners. Smooth – sure – but I miss the fine adjustment of the 18:1 the ratio. The Gretsch tuners are, well, ordinary – let’s leave it at that, not terrible but far from great. With that said, I don’t feel any need to change the tuners on the Eastman.

The bone nut on the Eastman is great but needs a little adjustment as it grabs in tuning. To be honest, the Graphtec nut on the Epi is probably as good in practice. 

PLAYING:
A really interesting journey. I have had the guitar now for 3 weeks. I use Thomastik Swing 12s (flatwounds) on the Joe Pass. I had the T486 prepared with Thomastik Jazz Bebop 12s (round wounds). The T486 was much brighter than I expected with these on neck and bridge, too much for what I wanted. After a few days hoping it would settle down, I swapped for the Swing flatwounds but in 11. That darkened the tone a bit, but I was also getting a slight phasing sound (best description for it) and it seemed harder to play cleanly than my Epi. I put it down to me getting used to the neck – but it did not make sense – the neck is a thinner section than the Epi which should suit me better. I loved the instrument but I was slightly disappointed. Then, 2 ½ weeks in something dawned on me as I was going between the Joe Pass and the T486...

The action. The action was much higher on the T486. I did not question it as I had the shop set the guitar up, but now I checked it. Much much higher. I checked the relief and set it to about 0.5mm at the 8[sup]th[/sup] fret. Dropped the bridge height to get a low action of about 1.75mm on 6[sup]th[/sup] string and 1mm on the first. Tuned and intonated and tuned again. A quick fret buzz check and (to some relief) not a sign of any buzz anywhere – these frets are perfect. Wow. The moment I played it again, it was a completely different instrument. Gorgeous full tone on the neck, bell like on the bridge. No sign of any phasing like sounds. Super easy to play with a light touch. It is now without question my favourite to play plugged in. The tone can be bright or warm, but it is always articulate. It is very responsive and quick single note runs or comping is a slick exercise. In terms of tone I put it between the sparkly Gretsch Filtertrons and the warm Probuckers, a ‘PAF’ style humbucker. In terms of the tone quality, the SDs of the T486 are superior to either of the others to me.

Unplugged, well it’s a semi-hollow, so other than some quick quiet practice it is not really worth considering. Better than a solid body for sure, but it’s not really what a 335 type is for. The full hollow, full bodied Joe Pass is the go-to instrument for me when playing at home unplugged – warm and clear, very rewarding and a very underrated guitar.

SUMMING UP:
Now, I really enjoy all of my guitars. I love that they each have their own sound and style. If we come down to the dollars I would say the Epiphone Joe Pass is pitched at the same price point as the T486 once you account for the case. The Epiphone has similar fancy appointments and a couple of extra features – coil splitting mainly and the lovely flower-of-life headstock inlays. The build of the Epiphone itself is great. It does it’s thing very well (for me) and I am very happy with it – it delivers what I expect for the price.

The T486 has something else – it’s a little intangible really, the combination of the quality parts, the finish, the lovely choice of materials, the feel of it, the quality of the tone. Together these things make me feel like I have received a quality guitar intended for a price point twice it’s actual price. This Eastman lifts the bar in this price range. I can’t compare it to a Gibson – I’ve never played one, and I’m not motivated to either – but let me put it like this, I don’t feel like I am missing out. It is just an excellent package beautifully made. At some point I am now sure to also try the Eastman jazz archtops, given my experience with the T486.

Hi. Selling my Eastman Romeo LA. In as new condition and has only been played a few times. The guitar plays and sounds amazing but it’s just not for me and I actually prefer my T386.

Looking £1325 inc fully insured shipping within the UK.

https://www.flickr.com/photos/193418067@...res/jNnQcX

Attached Files

32F6B30A-61A9-4087-9B2C-5613617315F3.jpeg

File size: 2.94 MB

Downloads: 58

Hi All,

I live on the opposite side of the Chesapeake Bay Bridge from a famous Maryland guitar manufacturer (I have a couple of their guitars in my collection).  I have been wanting to acquire a DC Junior-style guitar, but going Custom Shop for a Junior is kind of like putting an elevator in a outhouse.  Please do not get my wrong, I own an R7.  It is one my most prized possessions, but a Junior has always been a working man's rock machine.  When a Junior is pulled out during a gig or a jam, one knows that that guitarist came to rock.   I stumbled on to the SB55DC/v in my search for a DC Junior (the non-Custom Shop business unit only produces the SC Junior).  It is every bit as nice as what is being built by the Custom Shop, but at the price point at which DC Juniors originally sold when adjusted for inflation.

As an aside, I am also looking at acquiring a Romeo LA.  One of my favorite instrumental guitarists is Johnny A. If the name does not ring a bell, search on "Johnny A Witchita Lineman" on YouTube.  While Johnny's signature guitar is carved solid wood and has humbuckers,  I was astounded by how much of that vibe the Romeo LA cops.

I used to own one of these and foolishly sold it  ....they are great guitars and if you have one you would consider selling, please send me an email or private message.
Thanks in advance.

I was just at my local Eastman dealer here in Memphis.
Martin Music on Poplar ave.
They just got a shipment of 35 Eastman instruments, guitars and mandolins!!
It may take a few days to get all the photos on to their website but I do know there were several OM models in the shipment.
I think it’s mostly the E series.
I am just a customer there and am hopeing that the E20ss they have in one of the boxes can go gone with me!
Robert

Attached Files

image.jpg

File size: 3.8 MB

Downloads: 65

I’m amazed at how stunning the antique varnish finish looks, however, in all the pictures I’ve seen, it appears to be very red.  So while I think it’s beautiful, it may be a bit too loud and red for my tastes.  Does anyone think this finish might mellow out over time, maybe turn a little more brown as the spruce ages?

I’ve been considering purchase of an E10 oo guitar and ran across a few of these LTD guitars.  They both have 00 bodies with solid wood spruce tops and mahogany or sapele sides, so what are the differences? The LTD say they only made 250, but I’ve seen several for sale.

As I understand it Eastman is having difficulty sourcing Sitka spruce, and for this reason the Traditional line E6 & E8 models are only being offered with torrefied European spruce tops.

For those of you who are plugged in and "in the know," is their any word on when non-torrefied Sitka spruce Traditional E6 & E8 models might return?

I'm curious if anyone has played one of these, specifically the studio with the cutaway.  I've been rather interested lately in a dread with a cutaway, and I'm curious if anyone has played one.